Three-dimensional analysis of posterior tooth inclinations in transverse and sagittal relationships: A cross-sectional study.

OBJECTIVE: To compare tooth inclinations in different sagittal skeletal patterns and transverse maxillary relationships three-dimensionally. METHODS: A cross-sectional study carried out with 132 three-dimensional digital models in the complete permanent dentition divided into six groups (n=22); three groups with maxillary atresia: G1- skeletal class I, G2- skeletal class II and G3-skeletal class III; three groups without maxillary atresia: G4- skeletal class I; G5- skeletal class II and G6- skeletal class III. The comparison between the skeletal pattern was performed by the non-parametric tests of Kruskal Wallis and Dunn and between the groups by the non-parametric test of Mann Whitney. RESULTS: Subjects with skeletal class II and maxillary atresia had a greater lingual inclination of the maxillary teeth than those with class I and III; Subjects with skeletal class II without atresia had a less lingual inclination of the mandibular molars than the other classes (p<0.05). The maxillary premolars showed no variation in dental inclination with atresia, independent of the skeletal class in G1, G2, and G3 (p>0.05). The mandibular premolars showed that the groups without atresia G4, G5, and G6 presented no significant difference (p>0.05). Lower premolars in skeletal class III malocclusion individuals with atresia had a more negative inclination than the others. CONCLUSION: There is a difference in the inclination of posterior teeth between individuals with and without maxillary atresia and skeletal classes I, II, and III.

Does the initial surface roughness of different CuNiTi wires affect the frictional resistance?

This study aimed to assess and correlate initial surface roughness and frictional resistance of rectangular CuNiTi wires inserted in different self-ligating brackets. The sample consisted of 40 bracket-wire sets (rectangular CuNiTi wires of 0.017" x 0.025" and passive self-ligating brackets) divided into four groups (n=10): metallic self-ligating bracket and metallic CuNiTi wire (G1); metallic self-ligating bracket and rhodium-coated CuNiTi wire (G2); esthetic self-ligating bracket and metallic wire (G3); esthetic self-ligating bracket and rhodium-coated CuNiTi wire (G4). The initial surface roughness of the wires was examined with a Surfcorder roughness meter, model SE1700. Later, frictional resistance was assessed in an Instron 4411 universal testing machine at a speed of 5 mm/min, in an aqueous medium at 35°C. Microscopic analyses of surface morphology were performed with scanning electron microscopy, using an LEO 1430, with magnifications of 1000X. Generalized linear models were applied, considering the 2 x 2 factorial (bracket type x wire type), at a 5% significance level. Regardless of bracket type, the groups with esthetic wires presented higher initial surface roughness than the groups with metallic wires (p<0.05). There was no significant difference between the different bracket-wire sets for frictional resistance and no significant correlation between frictional resistance and initial surface roughness in the environment studied. It is concluded that esthetic wires presented higher initial surface roughness but did not interfere with the frictional resistance between brackets and wires.

Does the initial surface roughness of different CuNiTi wires affect the frictional resistance?

Abstract This study aimed to assess and correlate initial surface roughness and frictional resistance of rectangular CuNiTi wires inserted in different self-ligating brackets. The sample consisted of 40 bracket-wire sets (rectangular CuNiTi wires of 0.017" x 0.025" and passive self-ligating brackets) divided into four groups (n=10): metallic self-ligating bracket and metallic CuNiTi wire (G1); metallic self-ligating bracket and rhodium-coated CuNiTi wire (G2); esthetic self-ligating bracket and metallic wire (G3); esthetic self-ligating bracket and rhodium-coated CuNiTi wire (G4). The initial surface roughness of the wires was examined with a Surfcorder roughness meter, model SE1700. Later, frictional resistance was assessed in an Instron 4411 universal testing machine at a speed of 5 mm/min, in an aqueous medium at 35°C. Microscopic analyses of surface morphology were performed with scanning electron microscopy, using an LEO 1430, with magnifications of 1000X. Generalized linear models were applied, considering the 2 x 2 factorial (bracket type x wire type), at a 5% significance level. Regardless of bracket type, the groups with esthetic wires presented higher initial surface roughness than the groups with metallic wires (p<0.05). There was no significant difference between the different bracket-wire sets for frictional resistance and no significant correlation between frictional resistance and initial surface roughness in the environment studied. It is concluded that esthetic wires presented higher initial surface roughness but did not interfere with the frictional resistance between brackets and wires.

Resumo O objetivo deste estudo foi avaliar e correlacionar a rugosidade superficial inicial e a resistência a fricção dos fios CuNiTi retangulares inseridos em diferentes bráquetes autoligados. A amostra foi composta por 40 conjuntos bráquetes-fios (fios retangulares CuNiTi de 0.017" x 0.025" e braquetes autoligados passivos), divididos em 4 grupos (n=10): bráquete autoligado metálico e fio CuNiti metálico (G1); braquete autoligado metálico e fio CuNiti com revestimento de rhodium (G2); bráquete autoligado estético e fio metálico (G3); bráquete autoligado estético e fio CuNiti com revestimento de rhodium (G4). A rugosidade superficial inicial do fio foi examinada com um rugosímetro Surfcorder modelo SE1700. Posteriormente, a resistência a fricção foi avaliada em uma máquina de ensaios universal Instron 4411, a uma velocidade de 5mm/min em meio aquoso à 35oC. Análises microscópicas da morfologia de superfície foram realizadas por microscopia eletrônica de varredura, utilizando um LEO 1430, com ampliações de 1000X. Foram aplicados modelos lineares generalizados, considerando o fatorial 2 x 2 (tipo de bráquete x tipo de fio), com o nível de significância de 5%. Independentemente do tipo de bráquete, os grupos com fios estéticos apresentaram maior rugosidade superficial inicial que os grupos com fios metálicos (p<0,05). Não houve diferença significativa entre os diferentes conjuntos bráquetes-fios quanto a resistência à fricção e não houve correlação significativa entre a resistência a fricção e a rugosidade superficial inicial no ambiente estudado. Conclui-se que os fios estéticos apresentaram maior rugosidade superficial inicial porém não interferiram na resistência a fricção entre os braquetes e os fios.

Relationship between aesthetic concern and self-esteem in adolescents with severe malocclusion.

OBJECTIVE: This study aimed to evaluate the relationship between aesthetic concern and self-esteem in adolescents with severe malocclusion. METHODS: A cross-sectional study developed with 543 adolescents from 11 to 13 years of age and severe malocclusion was selected. Dental aesthetic index (DAI) diagnosed the malocclusion and selected the groups with greater severity (DAI 3 and 4). Aesthetic concern was assessed using the oral aesthetic subjective impact scale (OASIS) and considered an outcome variable. The global negative self-evaluation (GSE) evaluated self-esteem. The variables were analysed using Poisson multiple regression and the model adjustment determined by the Akaike information criterion (AICC). The effect of each variable on OASIS was expressed as a prevalence ratio (PR) with 95% confidence intervals. The analyses were performed using the R program with a significance level of 5%. RESULTS: A significant association was observed between aesthetic concern scores and self-esteem (p<.05). Individuals with low self-esteem had OASIS scores 14% higher (PR: 1.14; 95% CI: 1.08-1.21). There was no significant association between OASIS and gender and age (p>.05). CONCLUSIONS: Self-esteem modulates how the individual perceives malocclusion. Adolescents with severe and very malocclusion and low self-esteem have greater aesthetic concerns.

A double-blinded randomized clinical trial of pain perception during orthodontic treatment / Ensaio clínico randomizado duplo cego de percepção da dor durante tratamento ortodôntico

Introduction: Orthodontic movement can cause painful symptoms, especially in the early stages of treatment. Objective: This study aimed to compare the performance of chewing gum and ibuprofen in pain control during the initial period of orthodontic treatment. Material and method: A randomized blind clinical trial, with an allocation ratio of 1:1, was developed with patients aged ≥18 years old. The sample size was established considering a significance level of 5% and test power of 80%, resulting in a minimum of 30 volunteers per group (n=90). Participants were paired regarding sex, age, the severity of malocclusion, defined by the Dental Health Component (DHC) of the Index of Orthodontic Treatment Need (IOTN), and crowding, determined by Little's irregularity index. The sample was randomly allocated to three groups: Group I (control) placebo; Group II chewing gum; and Group III Ibuprofen. Pain perception was evaluated by the Visual Analog Scale (VAS) in the first 24, 36, and 48 hours after activation of the orthodontic appliance. The data were analyzed by generalized linear models for repeated measures in time. Result: No statistically significant difference (p>0.05) was observed among the groups for the methods of pain therapy evaluated in 24, 36, and 48 hours post-activation. Conclusion: There was no difference among the method used for pain control during the orthodontic treatment.

Introdução: A movimentação ortodôntica pode causar sintomatologia dolorosa, principalmente nas fases iniciais do tratamento. Objetivo: Este estudo teve como objetivo comparar o desempenho da goma de mascar e do ibuprofeno no controle da dor durante o período inicial do tratamento ortodôntico. Material e método: Foi desenvolvido um ensaio clínico randomizado cego, com razão de alocação de 1:1, com pacientes com idade ≥ 18 anos. O tamanho da amostra foi estabelecido considerando um nível de significância de 5% e poder do teste de 80%, resultando em um mínimo de 30 voluntários por grupo (n=90). Os participantes foram pareados quanto ao sexo, idade, gravidade da má oclusão, definida pelo Componente de Saúde Bucal (DHC) do Índice de Necessidade de Tratamento Ortodôntico (IOTN), e apinhamento, determinado pelo índice de irregularidade de Little. A amostra foi distribuída aleatoriamente em três grupos: Grupo I (controle) placebo; Goma de mascar Grupo II; e Grupo III Ibuprofeno. A percepção da dor foi avaliada pela Escala Visual Analógica (EVA) nas primeiras 24, 36 e 48 horas após a ativação do aparelho ortodôntico. Os dados foram analisados por modelos lineares generalizados para medidas repetidas no tempo. Resultado Não foi observada diferença estatisticamente significativa (p>0.05) entre os grupos para os métodos de terapia da dor avaliados em 24, 36 e 48 horas pós-ativação. Conclusão: Não houve diferença entre o método utilizado para controle da dor durante o tratamento ortodôntico.

What Factors are Associated with Health-Related Quality of Life in Mixed Dentition Children?

Abstract Objective: To associate the OHRQoL and HRQoL in mixed dentition children with the influence on age range, socioeconomic and clinical variables. Material and Methods: A cross-sectional study was carried out with 1,240 children between 6 and 12 years of age. HRQoL was assessed by the Quality of Life Assessment Scale, considered an outcome variable. OHRQoL was determined using specific questionnaires related to the age group: Oral Health Impact Scale in Early Childhood, Child Perceptions Questionnaire for 8 to 10 years, and 11 to 12 years. Dental caries and malocclusion were diagnosed. The socioeconomic class was evaluated. A multiple negative binomial regression analysis was used to test the relationship between HRQoL, OHRQoL scores and socioeconomic and clinical variables. Correlation analyses were performed between the total HRQoL and OHRQoL, with a significance level of 5%. Results: The HRQoL is inversely related to the impact of OHRQoL (p<0.05), modulated by the age group. There was a significant weak negative correlation between the HRQoL scores and the impact of OHRQoL (p<0.05). Conclusion: The OHRQoL impacts the HRQoL, modulated by the age group and with minor influence from socioeconomic and clinical variables (AU).

A Multivariate Analysis of the Psychosocial Impact of Malocclusion and Self-Esteem in Adolescents

Abstract Objective: To evaluate the psychosocial impact of malocclusion and self-esteem in adolescents in the Amazon region. Material and Methods: A cross-sectional study was carried out with 212 adolescents with 12-year-old enrolled in all public schools in the Boca do Acre (Amazonas, Brazil). Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) assessed the psychosocial impact of malocclusion. The self-perception of the need for orthodontic treatment was evaluated by the Aesthetic Component (AC) of the Index of Orthodontic Treatment Need (IOTN) and Global Negative Self-evaluation (GSE), the adolescent's self-esteem. The malocclusion was clinically evaluated by the Dental Aesthetic Index (DAI). The variables with p<0.20 in the individual analyses were tested in multiple logistic regression models, and those with p<0.10 remained in the model. The adjusted odds ratio (OR) was estimated with a 95% confidence interval (CI). Results: Adolescents with low self-esteem were 2.20 (95% CI: 1.23-3.93) times more likely to have a more significant impact on dental aesthetics (p<0.05). When verified by domains, the adolescents with low self-esteem had 2.33 (95% CI: 1.31-4.17) and 1.93 (95% CI: 1.09-3.42) times more likely to impact the psychological and social domains of the PIDAQ, respectively. Conclusion: Self-esteem influenced adolescents' perception of dental aesthetics in the domains related to psychological and social impact (AU).

Impact of facial profile on young adults' oral health-related quality-of-life item levels: A hierarchical analysis.

OBJECTIVE: To assess the impact of facial profile on young adults' oral health-related quality of life (OHRQoL) item levels. METHODS: A cross-sectional study was carried out with a population-based sample of 205 young adults, with a mean age of 23.1 years. The individuals answered questions about OHRQoL (OHIP-14) and self-esteem (Global Negative Self-Evaluation). The Dental Health Component (DHC) of the Index of Orthodontic Treatment Need (IOTN) was used to evaluate normative orthodontic treatment needs and define dental malocclusion clinically. Facial profile was analyzed using photographs and dichotomized into two levels: normal (straight) and altered facial profile (convex or concave). A calibrated researcher performed the clinical examination. Association between the independent variables and the outcome (OHRQoL) was established by hierarchical multiple linear regression analysis for each item level. Considering the variable of interest (facial profile), the psychological incapacity domain was the most affected item. RESULTS: Individuals with changed facial profile had 2.47 (1.04-5.85) times higher chances of reporting impacts on psychological incapacity than those with a normal profile (p> 0.05). The association was modulated by dental malocclusion and self-esteem. CONCLUSIONS: The convex and concave facial profile showed a negative impact on the psychological aspects of young adults' quality of life.

Orthodontists' preferences regarding the difference of bracket bonding height between the maxillary incisors.

INTRODUCTION: The vertical position of orthodontic brackets in maxillary incisors may influence the incisal step between the anterior teeth and thereby interfere with the smile esthetics. Even so, esthetic standards have been modified over time and consistently required technical adjustments. OBJECTIVE: This study analyzed orthodontists' preferences regarding the difference of bracket bonding height between the maxillary central incisors (MCI) and maxillary lateral incisors (MLI), and further determined whether the orthodontist sex, age and time of specialization have association to their choices. METHODS: This study collected data through an electronic form. Study participants analyzed a clinical case in which they indicated their preference for bracket bonding height. The placement height options ranged from 3.0 mm to 5.5 mm from the incisal edge, with 0.5-mm intervals, or at the clinical crown center (CCC). The difference in the bonding height between the MCI and MLI was analyzed, considering the formation of incisal steps between these teeth. RESULTS: Participants indicated that the difference in bracket bonding height between the MCI and MLI should be as follows: 0 mm (3.9%); 0.5 mm (78.3%); 1 mm (7.6%); 1.5 mm (0.2%); and CCC (9.9%). There was no statistically significant correlation between the choice for bracket bonding height and sex, age and time since specialization. CONCLUSION: Most participating orthodontists choose the 0.5-mm difference in bracket placement height between the MCI and MLI. The variables sex, age and time since specialization did not influence this choice.

Temporomandibular disorder symptoms in the university context.

OBJECTIVE: To assess the impact of the university context of different academic fields and class times and the sociodemographic context on the symptoms of temporomandibular disorder (TMD). METHODS: A total of 2912 university students, divided into 26 undergraduate courses distributed in the fields of biology and exact and human sciences in the day and night participated in this study. The symptoms of orofacial pain and TMD were assessed using a self-explanatory questionnaire for screening, as recommended by the American Academy of Orofacial Pain. The data were analyzed using frequency distribution tables and multiple logistic regression at a 5% significance level. RESULTS: There was a significant association between the female sex and the attended class time. Women and undergraduates of night courses were 1.60 times more likely to present symptoms related to TMD compared to women studying during the day. CONCLUSION: It was concluded that, within the university context, women and undergraduate students enrolled in night courses were more likely to present with TMD symptoms.

Knowledge and clinical practices of orthodontists regarding the treatment of patients with aids. A nationwide study

Aim: To evaluate orthodontists' knowledge and clinical practices regarding the treatment of patients with HIV/AIDS. Methods: Cross-sectional study performed with 655 Brazilian orthodontists based on a previously calculated sample size. Self-administered questionnaires were sent to orthodontists to collect information on knowledge and clinical conduct regarding the care of patients with HIV/AIDS. The study evaluated the awareness of possible risk factors for contamination, oral manifestations of HIV, need for more information on the care of HIV-positive patients, whether orthodontic treatment is indicated in HIV-positive patients, and whether they had knowingly performed orthodontic treatment in HIV-positive patients. Simple regression models were adjusted, and crude Odds Ratios estimated the associations with 95% confidence intervals. The variables with P < 0.20 in the crude analysis were tested in multiple logistic regression models, and those with P ≤ 0.05 were maintained in the final model. Magnitudes were estimated by adjusted Odds Ratios values, with 95% confidence intervals. Results: Orthodontists who were aware of the oral manifestations of HIV/AIDS, those having work experience of more than 20 years, and those who believed that orthodontic treatment could be indicated for these patients were 3.30 (1.79-6.10), 2.74 (1.36-5.52) and 1.92 (1.13-3.24) times more likely to perform orthodontic treatment in HIV-positive patients, respectively. Most orthodontists (92.9%) reported they needed to obtain more information about orthodontic care in patients with HIV/AIDS. Conclusion: Although orthodontists reported feeling able and qualified to provide dental care to patients with HIV/AIDS, gaps in their knowledge need to be addressed with further training

The influence of elastomeric ligatures pigmentation on smile aesthetics during orthodontic treatment.

AIM: To assess the influence of elastomeric ligatures, subjected to a previous in vitro pigmentation process using different substances, on smile aesthetics during orthodontic treatment, from the perception of students and professionals. METHODS: Eight elastomeric ligatures of five commercial brands (3M/Unitek, American Orthodontics, Morelli, Ortho Technology, and Orthometric) (n=8) were immersed in coffee, Coca-Cola, and red wine for one minute per day, for 28 days; and another group of ligatures was immersed in artificial saliva. All samples were photographed and subsequently analyzed using the Adobe Photoshop software, by the RGB method. Afterwards, the pigmented ligatures were inserted in a patient wearing orthodontic brackets, and zoomed photographs of the smile were taken and presented to 40 evaluators, who filled in a satisfaction scale sheet to express their opinion on the smile aesthetics of each photograph. The color data were subjected to analysis of variance (ANOVA) and Tukey tests. RESULTS: The substance with the highest pigmentation potential was coffee (p< 0.05) followed by red wine (p< 0.05). Comparison among the brands used in this study showed that American Orthodontics and Orthometric had the lowest degree of pigmentation when immersed in coffee and red wine (p< 0.05), respectively. However, the brand that showed the highest level of satisfaction among the evaluators was Ortho Technology. CONCLUSIONS: The presence of pigmented elastomeric ligatures affected smile aesthetics, when compared with the control group.

The influence of elastomeric ligatures pigmentation on smile aesthetics during orthodontic treatment

ABSTRACT Aim: To assess the influence of elastomeric ligatures, subjected to a previous in vitro pigmentation process using different substances, on smile aesthetics during orthodontic treatment, from the perception of students and professionals. Methods: Eight elastomeric ligatures of five commercial brands (3M/Unitek, American Orthodontics, Morelli, Ortho Technology, and Orthometric) (n=8) were immersed in coffee, Coca-Cola, and red wine for one minute per day, for 28 days; and another group of ligatures was immersed in artificial saliva. All samples were photographed and subsequently analyzed using the Adobe Photoshop software, by the RGB method. Afterwards, the pigmented ligatures were inserted in a patient wearing orthodontic brackets, and zoomed photographs of the smile were taken and presented to 40 evaluators, who filled in a satisfaction scale sheet to express their opinion on the smile aesthetics of each photograph. The color data were subjected to analysis of variance (ANOVA) and Tukey tests. Results: The substance with the highest pigmentation potential was coffee (p< 0.05) followed by red wine (p< 0.05). Comparison among the brands used in this study showed that American Orthodontics and Orthometric had the lowest degree of pigmentation when immersed in coffee and red wine (p< 0.05), respectively. However, the brand that showed the highest level of satisfaction among the evaluators was Ortho Technology. Conclusions: The presence of pigmented elastomeric ligatures affected smile aesthetics, when compared with the control group.

RESUMO Objetivo: Avaliar a influência das ligaduras elásticas submetidas a um processo prévio de pigmentação in vitro, com diferentes substâncias, na estética do sorriso durante o tratamento ortodôntico, segundo a percepção de alunos e profissionais. Métodos: Oito ligaduras elásticas de cinco marcas comerciais (3M Unitek, American Orthodontics, Morelli, Ortho Technology e Orthometric) (n = 8) foram imersas em café, Coca-Cola e vinho tinto por um minuto por dia, por 28 dias, e outro grupo de ligaduras foi imerso em saliva artificial. Todas as amostras foram fotografadas e posteriormente analisadas no software Adobe Photoshop, pelo método RGB. Em seguida, as ligaduras pigmentadas foram inseridas em um paciente com braquetes ortodônticos, e fotografias ampliadas do sorriso foram tiradas e apresentadas a 40 avaliadores, que preencheram uma escala de satisfação para representar sua opinião sobre a estética do sorriso de cada fotografia. Os dados de cor foram submetidos à análise de variância (ANOVA) e testes de Tukey. Resultados: A substância com maior potencial de pigmentação foi o café (p< 0,05), seguido do vinho tinto (p< 0,05). A comparação entre as marcas utilizadas nesse estudo mostrou que a American Orthodontics e a Orthometric apresentaram o menor grau de pigmentação quando imersas em café e vinho tinto (p< 0,05), respectivamente. Porém, a marca que apresentou maior nível de satisfação entre os avaliadores foi a Ortho Technology. Conclusões: A presença de ligaduras elásticas pigmentadas afetou a estética do sorriso, quando comparada à do grupo controle.

Light Activation and Thermocycling Methods on the Shear Bond Strength of Brackets Bonded to Porcelain Surfaces.

The present study was evaluated the effect of different light activation and thermocycling methods on the shear bond strength (SBS) and on the adhesive remnant index (ARI) of metal brackets bonded to feldspathic ceramic. Hundred metal brackets were bonded to 20 porcelain cylinders, divided into four groups (n=25) based on light activation and thermocycling processes. The cylinders were etched with 10% hydrofluoric acid for 60 s and coated with two layers of silane. The brackets were bonded with Transbond XT composite resin. Light activation in Groups 1 and 3 was performed during 3 s using the VALO Ortho Cordless appliance with irradiance 3,200 mW/cm2 and in Groups 2 and 4 for 40 s using Optilight Max appliance with irradiance 1,200 mW/cm². The samples were stored in deionized water at 37°C for 24 h and the samples from Groups 1 and 2 were submitted to the SBS test at a rate of 1 mm/min, whereas the samples from Groups 3 and 4 were submitted to 7,000 thermal cycles (5°/55°C) before to the SBS test. The data were assessed by two-way analysis of variance and by Tukey's test (a=0.05). No significant difference was observed between SBS means in the different light activation devices used. The samples subjected to thermocycling revealed lower SBS values (p≤0.05). There was predominance of score 0 for ARI in all groups. Therefore, the different light activation methods did not interfere in SBS, but thermocycling reduced SBS.

Influence of the growth pattern on cortical bone thickness and mini-implant stability.

INTRODUCTION: Controversial reports suggest a relationship between growth pattern and cortical alveolar bone thickness, and its effect in the use of mini-implants. OBJECTIVE: The main purpose of this study was to assess the influence of the growth pattern on the cortical alveolar bone thickness and on the stability and success rate of mini-implants. METHODS: Fifty-six mini-implants were inserted in the buccal region of the maxilla of 30 patients. These patients were allocated into two groups, based on their growth pattern (horizontal group [HG] and vertical group [VG]). Cortical thickness was measured using Cone Beam Computed Tomography. Stability of mini-implants, soft tissue in the insertion site, sensitivity during loading and plaque around the mini-implants were evaluated once a month. Intergroup comparisons were performed using t tests, Mann-Whitney tests, and Fisher exact tests. Correlations were evaluated with Pearson's correlation coefficient. RESULTS: The cortical bone thickness was significantly greater in the HG at the maxillary labial anterior region and at the mandibular buccal posterior and labial anterior regions. There was a significant negative correlation between Frankfort-mandibular plane angle (FMA) and the labial cortical thickness of the maxilla, and with the labial and lingual cortical bone thicknesses of the mandible. No significant intergroup difference was found for mini-implant mobility and success rate. No associated factor influenced stability of the mini-implants. CONCLUSIONS: Growth pattern affects the alveolar bone cortical thickness in specific areas of the maxilla and mandible, with horizontal patients presenting greater cortical bone thickness. However, this fact may have no influence on the stability and success rate of mini-implants in the maxillary buccal posterior region.

Micrographic evaluation of different widia compositions of orthodontic pliers submitted to peracetic acid and intensive use / Avaliação micrográfica de diferentes composições de widia de alicates ortodônticos submetido ao ácido peracético e uso intensivo

Introduction: The sterilization and disinfection procedures should be adapted to the chemical profile of the metal alloys present in the instruments. Objective: This study aimed to perform a micrographic assessment on the surface characteristics of the widia of orthodontic pliers with two alloy compositions subjected to the action of 0.2% peracetic acid and intensive use. Material and method: Twenty distal cutting pliers were divided into two groups (n=10) according to widia composition (%wt): W1- 85% to 87% of tungsten carbide (TC) and other components in the proportion of 13% to 15% and W2 - 87.5% to 88.5% of tungsten carbide and 11.5% to 12.5% for other components. All the pliers were assessed in a stereoscopic magnifying glass (32x) after three treatments: before use (T0); after cutting 100 segments of rectangular stainless-steel wires - intensive use (T1); and after 100 sterilization cycles in 0.2% peracetic acid and intensive use (T2). The cutting sites of all pliers were standardized. Widia regions were defined by line "A" representing T1 and line "B" representing T2. A frequency distribution table and Fisher's exact test (α=0.05) was performed. We assessed two widia from each composition and treatment in SEM and energy-dispersive X-ray spectroscopy (EDS/SEM). Result: The results showed that W1 pliers presented significantly fewer defects after the sterilization cycles with peracetic acid and intensive use than W2 pliers (p=0.0198). There were no differences between both pliers after intensive use (p=1.000). Conclusion: The SEM images and EDS analyses showed changes in widia surfaces after the different treatments. Widia composition affected the resistance of the orthodontic pliers after sterilization cycles with 0.2% peracetic acid and intensive use.

Introdução: Os procedimentos de esterilização e desinfecção devem ser adaptados ao perfil químico das ligas metálicas presentes nos instrumentos. Objetivo: O objetivo do estudo foi realizar uma avaliação micrográfica das características da superfície da widia de alicates ortodônticos com duas composições de ligas submetidas à ação de ácido peracético a 0,2% e uso intensivo. Material e método: Vinte alicates de corte distal foram divididos em dois grupos (n=10), de acordo com a composição widia (% em peso): W1- 85% a 87% de carboneto de tungstênio e outros componentes na proporção de 13% a 15% e W2 - 87,5% a 88,5% de carboneto de tungstênio e 11,5% a 12,5% para outros componentes. Os alicates foram avaliados em uma lupa estereoscópica (32x) após três tratamentos: antes do uso (T0); após corte de 100 segmentos de fios retangulares de aço inoxidável- uso intensivo (T1); após 100 ciclos de esterilização em ácido peracético a 0,2% e uso intensivo (T2). Os locais de corte dos alicates foram definidos pela linha "A" representando T1 e pela linha "B" representando T2. Foi realizada uma tabela de distribuição de frequências e o teste exato de Fisher (α=0,05). As widias foram avaliadas em MEV e Espectroscopia de Energia Dispersiva. Resultado: Os alicates W1 apresentaram defeitos significativamente menores após os ciclos de esterilização com ácido peracético e uso intensivo do que os alicates W2 (p=0,0198). Não houve diferenças entre os dois alicates após uso intensivo (p=1.000). Conclusão: As imagens de MEV/EDS mostraram alterações nas superfícies widia após os diferentes tratamentos. A composição widia afetou a resistência do alicate ortodôntico após ciclos de esterilização com ácido peracético a 0,2% e uso intensivo.

Influence of social capital on self-perception related to orthodontic treatment need

Aim: To evaluate the influence of social capital on self-perception related to orthodontic treatment need. Methods: A cross-sectional study was conducted with a sample of 578 11-16 years-old adolescents from a city in southern Brazil. Social capital was evaluated using the Social Capital Questionnaire for Adolescent Students (SCQ-AS). Index of Orthodontic Treatment Need (IOTN) assessed malocclusion and self-perception related to orthodontic treatment need. Sociodemographic aspects of adolescents were also evaluated. Individual analyses were performed, relating the study variables to the outcome, estimating the odds ratio with the respective confidence intervals of 95%. The variables with p<0.20 in the individual analyses were tested in the multiple logistic regression models, and those with p<0.10 remained in the model. Results: Social capital did not influence the self-perception related to orthodontic treatment need. Adolescents with high orthodontic needs were 5.35 (CI 95%: 2.68 to 10.65) times more likely to perceived orthodontic treatment need (p <0.05). Crowding and dental absence were associated with self-perception related to orthodontic treatment need (p <0.05). Conclusions: Social capital did not influence the self-perception related to orthodontic treatment need

Prevalência das lesões de mucosa bucal e seu impacto na qualidade de vida de escolares / Prevalence of mucosa injuries and its impact on the quality of life of schools

Objetivo:Avaliar a prevalência das lesões de mucosa bucal e seu impacto na qualidade de vida relacionada à saúde bucal em crianças matriculadas nas escolas municipais de Caicó, Rio Grande do Norte (RN). Métodos:Foram selecionados 71 escolares entre 8 a 10 anos de idade regularmente matriculados em Escolas Municipais de Caicó/RN. A amostra foi divida em dois grupos: Grupo lesão (GL): composto por 26 crianças com presença de lesões bucais e Grupo controle (GC): composto por 45 crianças que não apresentaram lesões bucais. A identificação das lesões bucais se deu pelo exame clínico com o auxílio de espátulas de madeira. As crianças responderam questionários (CPQ8-10) acerca da qualidade de vida relacionada à saúde bucal. Foi realizada a comparação intergrupos para a avaliação da qualidade de vida e seus componentes por meio do teste t. Em todos os testes foram adotados níveis de significância de 5%. Resultados:A prevalência de crianças que apresentaram lesão de mucosa foi igual a 36,61%, (n = 26). Os tipos mais comuns de lesões foram úlceras aftosas 23,94% (n = 17) e mucocele com 5,63% (n = 4). Houve diferença estatisticamente significante para qualidade de vida entre os grupos avaliados. Pacientes sem lesões bucais apresentaram uma melhor qualidade de vida em detrimento ao grupo das lesões (p = 0,045). Conclusão: Lesões bucais causam um impacto negativo na qualidade de vida relacionada à saúde bucal em crianças de 8 a 10 anos.

Aim: To evaluate the prevalence of oral mucosa lesions and their impact on oral health-related quality of life in children enrolled in the city schools of Caicó, Rio Grande do Norte (RN), Brazil. Methods: Seventy-one schoolchildren, from 8 to 10 years of age, regularly enrolled in the Caicó/RN City School System, were selected. The sample was divided into two groups: the Injury Group (IG): comprised of 26 children with oral lesions and the Control Group (CG): comprised of 45 children who did not present oral lesions. Oral lesions were identified by clinical examination with the aid of wooden spatulas. The children answered questionnaires (CPQ8-10) about oral health-related quality of life. Intergroup comparison was performed to assess the quality of life and its components by the Student's t-test. In all tests, significance levels of 5% were adopted. Results: The prevalence of children with mucosal lesions was 36.61% (n = 26). The most common types of lesions were aphthous ulcers, at 23.94% (n = 17), and mucocele, at 5.63% (n = 4). A statistically significant difference was observed in the quality of life correlation between the evaluated groups. Patients without oral lesions had a better quality of life than did the group of lesions (p = 0.045). Conclusion: Oral lesions have a negative impact on the oral health-related quality of life in children from 8 to 10 years of age.

Prognóstico entre eixo de erupção dos caninos permanentes superiores e espaço para erupção dos segundos molares inferiores / Prognosis between superior permanent canines teeth eruption axis and second lower molars space for eruption

Resumo O objetivo deste estudo foi verificar a associação entre a má posição do germe dos segundos molares inferiores com o eixo de erupção dos caninos permanentes superiores na dentadura mista. A amostra foi composta por 506 radiografias panorâmicas digitais, no período intertransitório da fase de dentadura mista, na faixa etária de 7 a 12 anos, de ambos os sexos. Os caninos foram avaliados utilizando-se a divisão da porção anterior do hemiarco em cinco setores sendo o setor 1 a melhor posição para eixo de erupção correto e 5 para a pior. Para a localização do germe dos segundos molares inferiores foi utilizada a distância horizontal entre a face distal dos primeiros molares inferiores e a borda anterior do ramo da mandíbula. Os dados foram analisados por tabelas de distribuição de frequências e regressão logística, com estimação dos Odds Ratio brutos e os respectivos intervalos de confiança. Não houve associação significativa entre o sexo e o eixo de erupção de caninos permanentes superiores (p>0,05). Houve associação entre a má posição de segundos molares inferiores e o eixo de erupção de caninos. Participantes com má posição de segundos molares inferiores apresentaram 3,40 (IC 95%, 2,12-5,47) vezes mais chance de ter o eixo de erupção de caninos permanentes superiores mal posicionados. Conclui-se que houve associação entre a má posição de segundos molares inferiores e o eixo de erupção de caninos.(AU)

Abstract This study aimed to associate malposition of lower second molar germ with the upper permanent canine teeth eruption axis in the mixed dentition. The sample included 506 digital panoramic radiographies taken in the mixed dentition inter-transitional period in the age group of 7 to 10 years of both sexes. The canines were assessed by dividing the anterior portion of the hemiarch into five sectors, in which sector 1 was the best position for the correct eruption axis and 5 was the worst. For locating the lower second molar germ, a horizontal distance was used between the distal aspect of the lower first molars and the anterior margin of the mandibular ramus. The data was analyzed with frequency distribution and logistic regression tables, estimating crude Odds Ratio and respective confidence intervals. There was no significant association between sex and upper permanent canines eruption axis (p>0.05). There was association between the lower second molars malposition and canines eruption axis. Participants with malposition of lower second molars presented 3.40 (95% CI, 2.12-5.47) times more likely to present upper permanent canines eruption axis malpositioned. It was concluded that there was association between the malposition of lower second molars and the canine eruption axis. (AU)

Fracture strength of monocrystalline and polycrystalline ceramic brackets during archwire torque / Resistencia à fratura de braquetes cerâmicos

Abstract Introduction In recent years, there has been an increasing demand for esthetic treatments, especially among orthodontic patients. Objective This study determined the fracture strength of monocrystalline and polycrystalline ceramic brackets of different manufacturers during archwire torque. Material and method Sixty ceramic brackets (Roth, right upper central incisors, 0.022 x 0.028-inch slot) were allocated into two groups (30 specimens per group) according to the type of ceramics: monocrystalline and polycrystalline. Subsequently, the groups were divided into three subgroups (n = 10) according to the manufacturer: Orthometric, Eurodonto and Ortho Technology. Sixty PVC cylinders were filled with chemically activated acrylic resin (CAAR), the brackets were fixed with CAAR onto the cylinder surface and the excess material was used to partially cover the base of the bracket. After 24h, the U-shaped wire base (0.019 x 0.025 inches; 6 mm height and width) was inserted into the bracket slot and fixed thereon with a stainless-steel wire. Vertical folds were made at the ends of the "U" to support the universal test machine chisel. The fracture strength test was performed at a speed of 1.0 mm/min until fracture into a universal test machine (Instron). The data were recorded, transformed into g.mm and submitted to two-way ANOVA followed by Tukey's post-hoc test (SAS Institute Inc., Cary, NC, USA, version 9.3) (α=5%). Result Monocrystalline brackets showed a higher fracture strength than polycrystalline brackets, regardless of the manufacturer (p<0.05). The highest fracture strength values were observed in Ortho Technology and Orthometric brackets, with no significant difference between them (p>0.05). Conclusion Monocrystalline ceramic brackets have a higher fracture strength than polycrystalline brackets, with significant manufacturer-dependent differences.

Resumo Introdução A demanda por tratamentos estéticos tem crescido nos últimos anos, sendo cada vez mais forte a preocupação com a estética por parte dos pacientes que buscam o tratamento ortodôntico. Objetivo Este estudo avaliou a resistência à fratura de bráquetes cerâmicos monocristalinos e policristalinos de diferentes fabricantes quando submetidos ao torque do fio. Material e método Sessenta bráquetes cerâmicos (Roth, incisivos centrais superiores direito, canaleta 0,022 x 0,028 polegadas) foram divididos em 2 grupos (30 espécimes por grupo) de acordo com o tipo da cerâmica: monocristalina e policristalina. Posteriomente estes grupos foram divididos em 3 sub-grupos (n=10) de acordo com o fabricante: Orthometric, Eurodonto e Ortho Technology. Segmentos de fio de aço inoxidável retangular (0,019 x 0,025 polegadas) foram dobrados em forma de "U", sendo que a base do "U" foi inserida na canaleta do bráquete e fixado com fio de amarilho em aço inoxidável (0,008mm). Nas extremidades do "U" foram realizadas dobras verticais para servir de apoio para o cinzel da máquina de ensaio universal Instron. O ensaio de resistência à fratura foi realizado à velocidade de 1,0 mm/min até ocorrer a fratura. Os dados foram registrados, transformados em g.mm e submetidos à ANOVA dois fatores e ao teste de Tukey (SAS Institute Inc., Cary, NC, USA, version 9.3) (α=5%). Resultado Os bráquetes monocristalinos apresentaram maior resistência à fratura em relação aos policristalinos, independente do fabricante (p<0,05). Os maiores valores de resistência à fratura foram obtidos com os bráquetes da Ortho Technology e Orthometric, os quais não diferiram estatisticamente entre si (p>0,05). Conclusão Bráquetes monocristalinos possuem maior resistência à fratura em relação aos policristalinos com diferenças na resistência à fratura entre os diferentes fabricantes.